Color Enhancer Wet-Look Penetrating Sealer | Matte wet-look protection for unpolished stone and masonry Read more.
StonePro Color Enhancer is a penetrating sealer that enriches the color of unpolished natural stone and masonry while leaving a matte wet-look finish. The UV-stable formula is intended for interior and exterior travertine, slate, brick, stamped concrete and decorative concrete.
Coverage: 800–1,000 sq. ft. per gallon, depending on surface porosity and texture. Use: Apply a liberal, even coat and spread for penetration. Allow 3–5 minutes, reapply where the surface appears dry after 3 minutes, then dry the surface with a clean microfiber cloth after 5 minutes. Repeat as needed, removing surface residue after each coat. Keep the surface dry for 3–5 hours, avoid traffic for 12 hours, and allow 24–72 hours for full repellency. pH: 7–9 at 5% dilution.
