922 Urethane Adhesive Remover | Low-odor remover for urethane flooring adhesive Read more.
Sentinel 922 Urethane Adhesive Remover is a low-odor, biodegradable remover for wet and recently cured urethane adhesive on prefinished wood flooring. It also helps release damaged glued-down wood flooring during removal.
Use: Work at approximately 70°F for best performance. Protect adjacent surfaces and drains. Wet the adhesive without overapplying, allow 30–60 minutes of dwell time, scrape away softened adhesive, then reapply and agitate as needed. Collect and dispose of residue according to applicable regulations. Wash and rinse the floor, allow the subfloor to dry for at least 24 hours, and verify moisture levels before reflooring. For glued-down wood flooring, cut the floor into 6–8 inch squares, apply 922 to the cut lines, allow 4–8 hours of dwell time, then lift the flooring and remove the remaining adhesive.
Coverage: 75–200 sq. ft. per gallon, depending on the application. pH: Not applicable.
